
- 产品名称:EJA438隔膜密封式压力变送器
- 浏览:
咨询热线:13920037278 022-24300522
点击留言
详细介绍 | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
EJA438隔膜密封式压力变送器 EJA438隔膜密封式压力变送器EJA438W/EJA438N型隔膜密封式压力变送器可用于测量液体、气体或蒸汽的流量,以及液位、密度和压力。 产品信息
特性
规格
产品选型 产品系列 EJA438W [Flange size: 2-inch (50 mm) and 3-inch (80 mm)]
The ‘6’ marks indicate the most typical selection for each specification. Example: EJA438W-DASA1AA-AA02-92NA/□ The ‘#’marks indicate the construction materials conform to NACE material recommendations per MR01-75. For the use of SUS316 material, there may be certain limitations for pressure and temperature. Please refer to NACE standards for details. *1: Refer to GS 01C22T01-00E for HART Protocol version. *2: In case of 部件材料code T (钽), the process temperature limit is -10 to 200 °C. *3: 部件材料code T (钽) cannot be applied. *4: Even in case where Fill fluid code D (fluorinated oil) is selected, if degrease cleansing treatment or both degrease cleansing and dehydrating treatment for the wetted parts is required, specify Optional code K1 or K5. *5: In case of 部件材料code H (哈氏合金 C), T (钽), and U (Titanium) or Fill fluid code C (for high temperature use), specify capillary length from 1 to 5 m. *6: Refer to GS 01C22T02-00E for Fieldbus communication. *7: Not applicable for 输出信号 code F and G. *8: Users must consider the characteristics of selected 部件材料and the influence of process fluids. The use of inappropriate materials can result in the leakage of corrosive process fluids and cause injury to personnel and/or damage to plant facilities. It is also possible that the diaphragm itself can be damaged and that material from the broken diaphragm and the fill fluid can contaminate the user's process fluids. Be very careful with highly corrosive process fluids such as hydrochloric acid, sulfuric acid, hydrogen sulfide, sodium hypochlorite, and high-temperature steam (150°C [302°F] or above). Contact Yokogawa for detailed information of the wetted parts material. *9: 哈氏合金 C-276 or ASTM N10276. *10: Refer to GS 01C22T03-00E for PROFIBUS PA communication. *11: JIS SUS316L or ASTM grade 316L. *12: JIS SUS304 or ASTM grade 304. Forged version may be used. *13: JIS SUS316 or ASTM grade 316. Forged version may be used. |
